Hydraulic Copper Continuous Casting Machine Water Cooling For 300 mm Brass Pipes GVT manufacturer from China Wuxi Huadong Industrial Electrical Furnace Co.,Ltd.

Hydraulic Copper Continuous Casting Machine Water Cooling For 300 mm Brass Pipes

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: GVT

Hydraulic Copper Continuous Casting Machine Water Cooling For 300 mm Brass Pipes
<br /

Hydraulic Copper Continuous Casting Machine Water Cooling For 300 mm Brass Pipes

. Copper Continuous Casting Machine Introduction:

A typical horizontal continuous casting unit for copper tubes consists of a combined melting-holding furnace with metal flowing under the surface (or separate melting and holding furnaces), a crystallizer, a cooling water system, a servo control withdrawal mechanism, an in-line synchronous saw, a saw for changing molds, a hydraulic furnace tilting system and an electric control system, etc.

The melting furnace and holding furnace can either be combined into one unit or separate from each other, depending on the material to be produced. When combined, the furnaces will use jet flow type inductors. In order to control the composition of the melt, a graphite plug and a channel made of silicon carbide will be installed between the two furnace chambers to prevent the melt from losing heat and absorbing the air. By doing so, the product quality will be stabilized and enhanced and the metal loss and energy consumption will be reduced.

Separate furnaces. Between the melting furnace and holding furnace there is a launder, through which the molten metal flows from the melting furnace into the holding furnace.
We supply launders and nozzles for casting.

Rods Specifications

Billet diameter:	10—300mm
Billet length:	From 1000mm
Number of strands:	1-6
Materials:	Copper alloys, copper -nickel, dhp copper, etc
Product capacity:	Up to 20,000t/a
Operators needed:	1~2 per shift

.Process:

Main equipments of production line
melting furnace, holding furnace, mold, micro-travel reversible casting machine, synchronizing shearing machines * 2, winding machines* 3, hydraulic unit, cooling unit, and electromechanical control unit etc.
* 2.1 For casting of pure metal or special requirements, subsurface channel-type smelting-holding combination furnace or controllable channel-type smelting-holding combination furnace can be adopted;

* 2.2 For producing round-shaped, tubular-shaped and special-shaped billets, cut-to-length synchronizing sawing machine can be adopted;

* 2.3 For producing round-shaped, tubular-shaped and special-shaped billets, the material stock platform for receiving and storing billets can be adopted.

. Equipment Components List of Horizontal Continuous Casting Production line for Rod-Wire

No.	Equipment Name and Spec.	Unit	Quantity	Remarks
1
2	Melting furnace	set	1	Including melting groove, coil, waer jacket and iron core.
3	Chute	set	2	One in-use and one standby
4	Holding furnace	set	1	Including melting groove, coil, water jacket, iron core, vertical temperature measurement device (specially-made), thermocouple (containing platinum and rhodium) and protection tube.
5	Molten steel storage ladle and chute	set	1	For transferring material into the mold after sintering in holding furnace.
6	mold system (30-200)	set	2	Including graphite mold
7	Dragger (5KW)	set	1
8	Synchronized auto-tracking sawing machine	set	1
9	Material stock platform	set	1	Chain drive, length of 5M
10	Header tank	set	1
11	Traction carrier roller	Set	1
12	Cooling water distributor	set	1	Including cooling water for transformer, reactor, coil of electric furnace, water jacket, water-cooling cable, and mold (primary and secondary cooling).
13	Hydraulic system	set	2	Including hydraulic station and cylinder (The hydraulic components produced by YUCI YUKEN HYDRAULICS CO., LTD. are adopted)
14	Electric-control operation system of electric furnace	set	1	Including the control cabinet for melting furnace and holding furnace (Siemens is chosen for main electrical elements).
15	Process control operation system	set	1	For control of servo motor and process, synchronized auto-tracking sawing machine, and control of material stock platform.

. Date of Delivery:
To be delivered within 75 days after the contract becomes effective.

. After-sales service
1. The main body of the equipment will have one year of free warranty, and special components shall be discussed separately;
2. During the trial-production period (within 3 months after equipment commissioning is finished), our company will dispatch a professional technician for follow-up service;
Within the warranty period, if fault occurs due to quality problem, our company will dispatch personnel to the site to solve the problem within 72 hours after receiving the notice;
After the warranty period of the equipment is expir