Post Offer Free
Wuxi Huadong Industrial Electrical Furnace Co.,Ltd.  

Gold Index: 2779

You are here: home  > AC Servo Motor Driven Copper Rod Casting Machine Continuous 50HZ
  • AC Servo Motor Driven Copper Rod Casting Machine Continuous 50HZ
  • AC Servo Motor Driven Copper Rod Casting Machine Continuous 50HZ
Enlarge AC Servo Motor Driven Copper Rod Casting Machine Continuous 50HZ

AC Servo Motor Driven Copper Rod Casting Machine Continuous 50HZ 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: GVT

 
AC Servo Motor Driven Copper Rod Casting Machine Continuous 50HZ
 
<span style=

 

AC Servo Motor Driven Copper Rod Casting Machine Continuous 50HZ


 
AN OXYGEN FREE COPPER ROD Φ8mm CONTINUOUS CASTING PRODUCTION LINE 


COMPOSITION OF EQUIPMENT 
Single furnace, continuous casting machine, guild wheel frame, wire frame, double bar coiling machine, water cooling system, temperature measurement system and control system.


 MAIN TECHNICAL PARAMETERS OF THE EQUIPMENT 
1, there is a core frequency induction furnace
(1) production of T2 copper rod (raw material electrolytic copper, bright wire)
(2) furnace body structure
(3) electric furnace power 45KW
(4) electric furnace voltage 380V
(5) the frequency of electric furnace 50HZ
(6) the melting rate of less than 150kg
(7) electric furnace capacity 500kg
2, continuous casting machine
(1) the number of cast rod 2
(2) cast rod diameter specification 8mm; head number 2
(3) drive AC servo drive
(4) servo motor power 1.3KW
(5) the tracking accuracy of the liquid level is + 2mm
3, double bar coiling machine
(1) automatic take-up rod
(2) to close the line into a circle around the weight of 300kg


PRODUCT TECHNICAL STANDARDS 
1, density: 8.9kg/dm fand


DELIVERY OF TECHNICAL DOCUMENTS AND DRAWINGS 
1.The Seller shall provide the following documents and drawings within 15 days after the contract is signed and effective.
a.    Equipment layout plan
b.   The basic condition of equipment and civil engineering
c.    Water and electricity layout
d.    The operation platform.
2. The Seller shall provide the following documents and drawings when the equipment is delivered.
a.    Process document and operation specification of continuous casting machine
b.    The general equipment and consumables drawings.
c.    Detail table of equipment wearing parts
d.    The electrical principle diagram and system diagram.
e.    The installation of electrical cable material list.


  SELLER'S SCOPE OF RESPONSIBILITY 

1. The Seller shall be responsible for the installation and commissioning of the contract equipment and the delivery of the relevant provisions of the annex.
2, according to the contract requirements to submit the relevant technical documents.
3. Responsible for the installation, commissioning and training of contract equipment.
4, equipped with special tools for the use of the installation.
5, technical services: customer service guaranteed for one year, life-long maintenance (except coil, water jacket, melting ditch).
6, follow-up technical support: equipment upgrades and assist to build the furnace, etc..
7, service response time: the buyer informed within 48 hours.
8, responsible for equipment acceptance and timely handling of the relevant transfer procedures.


BUYER'S SCOPE OF RESPONSIBILITY
1, production workshop: span, length, height of crane lifting equipment installation, all shall comply with the requirements.
2, circulating cooling water.
3, power supply.
4, compressed air.
5, test for production of raw materials and auxiliary (charcoal, graphite flake etc.)
6, the seller is responsible for the provision of equipment in the installation process of staff and board.


MAIN EQUIPMENT CONFIGURATION AND SUPPLY RANGE 
 

  Device name Quantity Remark
1 Power frequency induction furnace with core(45KW) Two body furnace 1 set Furnace body, furnace body bracke
Sensor 1 set Iron core, coil, water jacket, channel 1
Furnace cover 1 set  
Oven building material 1 set

Quartz sand, insulating material, refractory brick
2 Furnace electric control Furnace electrical control 1 set One Electric cabinet ,one control cabinet 
Furnace temperature detection 1 set Display cabinet with temperature
3 Temperature measurement system Water inlet diversion device 1 set Valve, pressure gauge, etc
Mould temperature detecting assembly 1 set  
Water temperature total 1 set  
4 Continuous casting machine Top lead continuous casting machine frame 1 set  
AC servo motor and speed reducer 1 set  
Guide wheel 2 set  
Ttraction drive system 1 set  
Mould hanging device 1 set  
Water cooling circulating device for mould 1 set  
5 Electric control cabinet Drive 1 set  
Man-machine interface 1 set  
PLC controller 1 set  
bigPhoto
 Mr. Mrs. Angel Zhang

Tel: 86-510-83788308
Contact to this supplier

Related Search

AC Servo Motor    Continuous Casting Machine    Ac Servo    Continuous Casting Mould    Motor Driven Tool    Copper Rod    More>>

Find more related products in following catalogs on Hisupplier.com

Electronic & Electrical >> Passive Components >> Others

Company Info

Wuxi Huadong Industrial Electrical Furnace Co.,Ltd. [China (Mainland)]


Business Type:Manufacturer
City: Wuxi
Province/State: Jiangsu
Country/Region: China (Mainland)

View Contact Details

You May Like:

Product (55)